Краткий ответ

Можно ли распылять средство для аэрогриля прямо на нагревательный элемент?

Не следует считать это допустимым по умолчанию. Отключите и полностью остудите прибор, затем проверьте инструкцию модели. Одни бренды разрешают только мягкую щётку или влажную ткань, другие прямо запрещают чистящее средство на элементе. Если явного разрешения нет, не распыляйте жидкость на элемент.

Direct answer: do not assume air-fryer cleaner can be sprayed directly onto the heating element. Unplug and fully cool the appliance, then read the model’s cleaning instructions. Some brands specify a soft brush or damp cloth; others explicitly prohibit cleaning agents on the element. A cleaner label does not replace the appliance manual.

Identify the part first. The basket, drip tray, coated cavity and upper heating element are different surfaces with different removal, water-resistance and tool limits. Instant Pot advises following the specific model manual and cooling first. If the manual is unavailable, use the model number to ask the manufacturer rather than copying another appliance’s method.

Published instructions differ. Philips advises unplugging and cooling, then using a soft-to-medium brush on the heating element. Ninja likewise says not to immerse the main unit and to use a cleaning brush. Breville instructs users to wipe along quartz elements with a soft damp sponge or cloth and explicitly says not to use a cleaning agent on them.

Therefore, “suitable for an air fryer” does not mean every internal component may be sprayed. GE also advises avoiding cleaning material on coil-type heating elements. Appliance construction, coatings, sensors and electrical connections differ; the final boundary comes from the model manual together with the current cleaner label.

EPHYON’s current 500 g air-fryer-cleaner page says to unplug, keep more than 10 cm from the stain when spraying, wipe, clean with water and dry, and lists surface and use precautions. These instructions support the published use steps, but they do not establish universal permission to spray a heating element directly.

A safer sequence is: unplug, cool and remove detachable parts; clean those parts and the cavity as instructed; if the upper element permits only brushing or a damp cloth, do not apply cleaner; make sure no moisture remains before reassembly and use. Do not allow liquid into the fan, electrical connections or a non-immersible main unit.

Scope: this article compares public cleaning instructions; it is not a universal conclusion for every air-fryer design and is not repair advice. If an element is deformed, coating is peeling, wiring is abnormal or cleaner has entered an electrical area, stop use and contact the manufacturer or a qualified service provider.