Direct answer
Cloudy glasses after dishwashing: add more detergent? Distinguish film from glass etching
Do not rush to increase the dose. Glasses that turn white or cloudy after dishwashing may have removable film or mineral deposits, or the glass surface may already have changed. Use the glassware and dishwasher instructions to distinguish the marks, then check water hardness, detergent and rinse-aid settings, loading and product dispensing. Different causes may call for opposite adjustments; adding more detergent or repeatedly running intensive washes is not a universal solution.
Whirlpool distinguishes film from etching. Film may involve hard-water deposits or detergent residue, while etching can permanently dull or roughen the surface. Both can look cloudy, but they are not necessarily the same kind of soiling, and a photograph alone cannot establish that every glass is damaged. First check the glassware's permitted care methods. If cloudiness persists, consult its manufacturer or the dishwasher's support team rather than repeatedly making the cleaning process more aggressive to find an answer.
The amount of detergent cannot be determined from a white appearance alone either. For white deposits that can be wiped off, Miele lists both insufficient and excessive detergent, with different adjustments for each. Increasing or decreasing the dose therefore needs a corresponding reason. Check the product format, packaging directions and appliance settings together; do not automatically add another tablet or an extra dose of powder when a glass looks white.
Water conditions need a separate check. Samsung's Canadian support page explains that white residue may involve hard water or excessive detergent, and that the water supplier can provide local hardness information. Check the relevant settings for the exact model. Miele's entries on salt shortages, the salt cap and water-hardness settings specifically apply to dishwashers fitted with a water softener. Confirm whether your appliance has the system before copying another machine's salt-filling or setup procedure.
The Bosch SPV68B53UC manual treats removable streaks and irreversible glass clouding as different problems. The entry for streaks concerns rinse-aid settings and detergent residue in the final rinse; the entry for irreversible clouding concerns the glassware's suitability for machine washing. Glass that lacks clarity can therefore require different responses. Do not treat a rinse-aid level or programme choice for another model or another symptom as a universal adjustment for this machine.
For glass that has already been etched, GE also describes the milky appearance as a surface change that cannot be removed like ordinary residue. Adding more detergent is therefore no basis for promising to restore the original shine. Whether the glassware can be machine-washed, and on which programme, still depends on its manufacturer's care instructions. Do not repeatedly extend programmes or increase their intensity in an attempt to remove cloudiness. If you cannot identify the nature of the marks, consult the relevant manufacturer first.
If the problem is residue, check whether the product can dispense normally as well. Whirlpool and this Bosch manual both mention that dishes blocking the detergent-dispenser lid can affect dispensing and rinsing results. Before the next wash, follow the appliance's loading instructions and check that the lid and relevant areas are unobstructed, rather than increasing the dose as soon as residue appears. If incompletely dissolved product remains in the dispenser, use the appliance instructions to investigate the lid and dissolving conditions before deciding whether to change the product.
Match the next adjustment to the specific problem. With removable film, first check water conditions, dosing, loading and rinse settings. If a surface change is suspected, check the glassware's washing resistance and care requirements. AutoDos and additional-rinse functions mentioned by Miele are model-dependent, not features on every machine. Reading the glassware instructions, dishwasher manual and product packaging together is more useful than deciding the dose solely from how white a glass looks.
If you are still unsure whether the hand-dishwashing liquid you have can go into the machine, see the separate question and answer. Deciding how a hand-washing product may be used is different from addressing dishwasher dosing, water conditions and changes to the glass surface. Products cannot be interchanged simply because both are used for dishes.

