EPHYON 500g Glass Polish: Cleaning Methods for Glass, Ceramics, and Smooth Surfaces

EPHYON 500g Glass Polish is a liquid surface cleaner with a switchable nozzle. Set the nozzle to SPRAY for a fine mist, STREAM for a focused jet, and OFF after use. For glass, ceramics, furniture and other smooth surfaces, choose the spray pattern according to the area that needs cleaning.

For daily dust, fingerprints, or light stains, you can first remove surface sand and hard particles, then spray the product in a mist onto the surface to be cleaned, and wipe it dry in time with a clean, dry cotton cloth. Removing particles first can reduce the appearance of fine scratches on glossy surfaces during wiping.

For localized heavy dirt, you can adjust the nozzle to a concentrated spray, aim at the area that needs treatment, and after wiping it dry, use a mist spray to complete the overall cleaning and polishing. There is no need to use a large amount at once; treating it in small amounts repeatedly makes it easier to control the flow and also facilitates cleaning the corners.

Before cleaning glass doors, windows, mirrors, and ceramic surfaces, make sure there are no special coatings, films, or surface treatments. For new materials or uncertain coatings, you can first test a small area in an inconspicuous spot. When wiping, use a clean, soft cloth and replace areas that have become dirty promptly.

Although the surfaces of furniture and appliance casings may both be smooth, the materials differ significantly. For high-gloss boards, lacquer, acrylic, metal finishes, and coated panels, the manufacturer's care instructions should be consulted. If the instructions specify using only water or certain products, follow those instructions.

The product instructions also include scenarios for TVs and computer screens. Before cleaning electronic screens, turn off the device and disconnect the power, and first use a soft, lint-free cloth to remove dust. Both Apple and Samsung device manuals emphasize not to spray liquid directly onto the screen or device openings; therefore, when handling electronic screens, the specific device instructions should be followed, and if necessary, apply a small amount of suitable cleaning solution to the cloth for gentle wiping, avoiding liquid entering the edges.

The regular glass, anti-reflective coating, matte layer, and nanostructure on the screen surface are not the same. Do not vigorously rub with tissues, rough cloths, or tools with particles, and do not restart the device while it is powered on or the surface is still damp. After cleaning, wait for the surface to be completely dry.

This product is volatile. After use, the nozzle should be turned to "OFF", the bottle kept upright, and stored in a cool place. The product is not drinkable and should be kept out of reach of children and pets. Do not transfer it to beverage bottles or unlabeled containers, and do not mix it with other household cleaners.

Daily operations can be summarized in four steps: first remove particles, then choose a mist or jet spray, wipe dry with a soft clean cloth, and finally close the nozzle and store properly. When dealing with electronic screens and special coated surfaces, take an extra step—first check the care instructions for the device or material.